Product details
1. Introduction of YYQ-1 (3) D balancing machine
Yyq-1 (3) D is a horizontal double-sided dynamic balancing machine with hard support driven by ring belt. The product adopts roller support and ring belt dragging. Meanwhile, it adopts servo motor to control the operation of equipment and the quasi-stop positioning of Angle. The product solves the problem of manual Angle finding when the belt balancing machine is balanced, greatly improves the weight removal rate and balance efficiency of the equipment, and is more suitable for the factory to batch production.
2. Measurement system
★ industrial control computer, 17 "LCD display (according to customer needs with a touch screen), Windows operating platform
★ with the company's independent development of the balance of the automatic positioning function of the special measurement system. Software functions cover all the functions of domestic mainstream balancing machine software; After the software sets the balance speed, the software controls the equipment to automatically reach the set speed without manual intervention
★ the motor starts to measure the speed and the software automatically starts to measure, the measurement completed software control servo motor left unbalance phase point in the designated position, press the command button servo motor will put the right unbalance phase point in the designated position
★ measuring system performance is strong: arbitrary workpiece calibration, measuring speed block, unbalance amplitude and phase stability, high deweighting and separation ratio, high sensitivity
★ software with allowable unbalance calculator, the operator only needs to input the allowable vibration of the workpiece precision level, mass, working speed, and radius click to calculate the number of grams to allow the remaining unbalance of the workpiece
★ software completely independent development, according to customer requirements to modify or add software functions (such as scanning the two-dimensional code to add the workpiece identity name to the measurement results to save for future quality investigation)
3. Mechanical parts and controls
★ swing frame by line cutting and matching processing, consistency and rigidity.
★ the double motor belt wheel configuration can avoid the belt pulley and the workpiece may produce the same frequency interference.
★ the ring belt adopts the pressure type structure, the belt hangs on the tight mechanism, the upper and lower workpiece without hanging the belt, convenient and fast.
★ ipc and PLC control servo motor running, speed software control, soft start soft stop
Note: please contact us for more information about the equipment
Manufacturer standard configuration parameters
Device model yyq-1d yyq-3d
The workpiece mass range is kg 0.05-1 0.1-3
The maximum diameter of the workpiece is mm 260 260
Two support spacing mm 50-260 50-260
The diameter range of the belt dragging place is mm 15-80 15-80
Support shaft diameter mm 4-17 4-17
Balance speed r/min when the drag is 50mm in diameter, 400-3000 when the drag is 50mm in diameter, 400-3000
Minimum residual unbalance ≤0.3 GMM /kg ≤0.3 GMM /kg
Unbalance reduction rate % > 90% > 90%
Measuring time 10S (related to measuring speed and setting period)
Servo motor power 0.4kw 0.4kw
Speed regulation mode software control software control
Transmission mode ring belt ring belt
Single-phase AC 220V, 50/60hz single-phase AC 220V, 50/60hz
★ the above is the factory's standard configuration equipment parameters, we support the product, system according to the customer's demand on the length of the equipment, the roller support workpiece shaft diameter range to do equipment structure allows reasonable changes
★ the device can be uneven marking function
★ equipment can be driven by belt - cutting
★ equipment can be added without affecting the measurement of performance of reasonable accessories, such as protection
